Class B Lighting Surge Protection

Class B Lighting Surge Protection

Surge Protection devices are suitable for B Class Surge protection, used at the equipotent connection of LPZ 0 and LPZ 1 zone, which protects the electrical network due to lightning and switching Surges.

Lightning Surge protector can be use of consumer systems against direct lightning stroke into the overhead power supply line or outdoor lightning protection system.

Class C Lighting Surge Protection

Class C Lighting Surge Protection

A protective device designed primarily for connection between a conductor of an electrical system and ground to limit the magnitude of transient over voltages on equipment.

Surge is abnormal increase in current and voltage for a very short period of time duration of 8/20 microsecond. A surge protector is an electrical device commonly used to protect Electrical , Electronics, Instruments components from power surges.

Class B+C Lighting Surge Protection

Class B+C Lighting Surge Protection

Class B+C Surge Protection devices is the combination of Class B (10/350us ) and class C ( 8/20 µs ) lightning and switching surge, used at the equipotent connection of LPZ 0 and LPZ 2 zone.

Lightning and surge protection device BDL/B+C/25....NPE is a combi controller which give protection from direct lightning & switching activity. The arrester can also be used in buildings that are supplied with power via an overhead line, since direct or partial lightning currents may be expected there as well.

Class D Data & Telecom Surge Protection

Class D Data & Telecom Surge Protection

A protective Data and Telecom Signal Surge Arrestors mainly suitable for lightning-proof of two low- voltage power (DC.AC), Distribution cabinets. Switch boxes and other important equipments that to suffer lightning for protect the damage caused by the over-voltage.

Data Signal Surge Arrestors mainly suitable for lightning-proof of two low- voltage power (DC.AC), Distribution cabinets. Switch boxes and other important equipments that to suffer lightning for protect the damage caused by the over-voltage.

Telecom Signal Surge Arrestors mainly suitable for lightning-proof of two low- voltage power (DC.AC), Distribution cabinets. Switch boxes and other important equipments that to suffer lightning for protect the damage caused by the over-voltage.